Monday, 9 March 2015

Prong Stone Settings

So when it comes to setting stones/ creating settings you need to be very careful....reason being is all the stones on Rhino are "calibrated'' and are exactly the same size....where in the real world they aren't always the same sizes....The guidelines for settings are;

Stones must be placed a minimum of 0.2mm away from each other

The claw diameter for setting stones are a minimum of 0.5mm thick with a minimum height of 0.7mm (in my previous post I discussed the volume of metal and how if there is enough volume it will be a successful print/cast... this is another one of those examples)

No comments:

Post a Comment